Chain link fences or frost fences are widely used in residential and commercial properties for the durability they offer. They are also affordable and provide excellent security. One of the great things about frost fences are they are relatively easier to install. If you are planning on installing these fences on your property, it is worth knowing about the installation process.
Here are the main steps that your chain link fence company will follow during the installation process:
Obtaining Necessary Permits
You will have to obtain all the essential building and zoning permits before beginning the fence construction. It is also required to determine if there are any kinds of restrictions on building the fence on your property. It will also be required to determine your property lines. Your fence installation company may also contact your utility companies to ensure a safe operation.
Determining Layout & Materials
The next step is to determine the fence’s location and create a sketch. The sketch is basically a plan that will make it easier to estimate the length of the chain link required to build the fence. Next, the professionals will calculate the number of line posts and end posts required.
The materials required for building frost fences include:
- Chain link mesh
- Wire ties
- Line posts
- Tension bars
- Eye tops
- Rails & rail ends
You fence installation company should take care of these requirements.
Determining Corner & Post Positions
The fence installers will determine the positions of the end, corner, and gate posts. This involves:
- Locating your property’s boundary lines
- Driving stakes into the ground along the property line
- Setting the end, corner, and gate posts
Setting Up Terminal Posts
18 to 30-inch deep and 8-inch-wide holes are dug to set the terminal posts in. The depth will be based on the soil condition and the local weather. The height of the terminal posts will be 2 inches higher than the fence fabric. The posts are set in place using concrete.
Setting Up Line Posts
Once the concrete footings for the terminal posts have hardened, the line posts are placed. Your installer will already have determined the spacing for the line posts. These posts are installed in a way to ensure their center aligns with the terminal posts’ center.
Next, the footings are crowned and fittings are added to the terminal posts. This is followed by applying the top rail.
Placing & Stretching the Fence Fabric
Next, the chain link fabric is unrolled and placed on the posts, starting from one terminal post. As the fabric is raised, it is attached to the top rail using tie wires. The fence fabric is stretched from the initial terminal post to the opposite terminal post. Installers ensure that there is always a small amount of give in the fabric when squeezed. Once the chain link fabric is set and installed, the installers will hang gates.
Thus, the steps involved in installing frost fences are relatively simple and take less time to complete. Chain link fences can be installed and ready to protect your property within 24 to 48 hours. It is always recommended to seek professional help to install your fences, especially if you want to create a beautiful Oasis Urbaine and ensure optimal security.
Conclusion
Chain link fences can add significant value to your property while being simple and affordable to install. Besides, these fences can provide a high level of protection, whether you choose them for your home or commercial property. You can also benefit from their low maintenance requirements, which can reduce the cost of ownership. These fences can continue serving their purpose without requiring extensive care and maintenance.
